Multifunctional Network Cable Tester Kit RJ45 RJ11 RJ12

Safety Instructions:

• (Please read the safety instructions before use or maintenance of this tester) This cable tester CAN NOT be used to test any electric items, like an electric wire. A 9V battery is required for this tester. It is advised to change the battery when any light becomes week. Test Can't be done if RU45 connectors are not totally pressed. Please use quality tools to press the network cable plugs. Remove the battery if the tester won't be used for a long time.

Operate Instructions:(eg: RJ45):

• 1. Turn on the tester with battery, choose “ON"(Normal grade), or '"S" (Slow grade) and you'll see the power light start to twinkle.
• 2. Connect the RJ45 cable with the Main tester and Remote tester, the lights of the main tester will turn on sequently form 1 to G as below: Main tester: 1-2-3-4-5-6-7-8-G Remote tester. 1-2-3-4-5-6-7-8-G

Abnormal connections as following:

• 1. In one cable, If No.2 is open-circuited, the two lights of No.2 on the main tester and remote tester will not turn on at the same time.
• 2. If several lines are not connected, the corresponding lights will not return on. If less than two lines are connected, none of the lights will turn on.
• 3. If two lines are disordered, for example, No2 and No.4, then it will display as below: Main tester: 1-2-3-4-5-6-7-8-G Remote tester: 1-4-3-2-5-6-7-8- G 4. If two or more lines are short-circuited, the corresponding lights won't be one of the remote tester whiles the main tester remains normal.